>> Line Powered and Draws Power from the USB Cable When Connected to a Computer
>> (3) 2-Position and (1) 3-Position CT Connector Inputs
>> Int'l Version Available w/ 5 Colored Voltage Leads & US Version w/ 4 Colored Voltage Leads
>> Optional Weather-tight Case Meets Strigent NEMA 4 Standards
>> ELOG™ Software for EliltePro SP for Set-up, Data Retrieval, Analysis and Export
>> Kit Includes Crocodile Voltage Clips, Software on CD and Voltage Lead Set with Transformer
Specifications
| Measured Parameters | Volts, Amps, Amp-Hrs (Ah), kW, kWh, kVAR, kVARh, kVA, kVAh, Displacement Power Factor (dPF) Note: Per Phase and System Total for Each Parameter |
| Service Type | Single Phase (2-Wire and 3-Wire) Three Phase (3-Wire [Delta] and 4-Wire [Wye]) |
| Voltage | Number: 3 Channels Range: 0 to 600 Volts AC or Line to Line 850 Volts AC |
| Current | Voltage Output CTs (0 to 333 mV AC) for Max. Safety Maximum Input: 0 to 666 Volts AC; 0 to 1,150 milli Volts DC |
| Measurement Type | True RMS Using High-Speed Digital Signal Processing (DSP) |
| Line Frequency | 50/60/400 Hz |
| Data Storage Capacity | 8MB of Internal non-Volatile Memory Capable of Storing 80 Days of Readings |
| Waveform Sampling | 12 kHz (16-Bit) Sampling Rate |
| Accuracy | <1% (<0.5% Typical) for V, A. kW, kVAR, kVA, PF |
| Channel Sampling Rate | Internal Sampling 200 Samples/Cycle at 60 Hz 240 Samples/Cycle at 50 Hz |
| Resolution | Amp: 0.01 Volt: 0.1 Watt: 0.1 VAR: 0.1 VA: 0.1 Power Factor: 0.01 |
| LED Indicators | 1 LED indicates Communication 4 LEDs for Correct Phasing (Green = Voltage and Current on Same Phase; Red = Incorrectly Wired)* 2 LED I/O Indicators *NOTE: Patented PhaseChek™ LED Indicators Guarantee Correct CT Orientation During Installation |
| Pulse Output | Open Collector 75 mA Max. Current, 5 Hz Max. Frequency |
| Communications | USB |
| Power | Line Power Supply: L1 Phase to L2 Phase. 80-600 Volts AC CAT III 50/60 Hz or DC 70 mA Max. Non-User Replaceable 0.5 Amp Internal Fuse Protection Power In: 6 to 10 Volts DC Max, 500 mA Min. (Optional) Power Out: 6 Volts DC, 200 mA Maximum |
| Operating Range | Temperature: -7°C to 60°C (20°F to 140°F) Humidity: 10 to 95% RH, non-condensing |
| Enclosure | ABS Plastic with 94-V0 Flammability Rating |
| Standards Compliance | CE |
| Software Compatible | Windows 7 (32 or 64 Bit), Vista, XP (32 or 64 Bit) |
| Weight | 340 grams (12 Oz.) - Excluding Sensors and Leads |
| Dimensions | 69mm x 58mm x 203mm (2.7" x 2.2" x 8.0") |
Applications
- Perform Load Profiling Analysis on Critical Electrical Panels and Switchgear
- Measurement, Verification and Trending for Forecasting Energy Use
- Energy Surveys for Demand Profiles
- Sub-Metering for Accurate Accountability