The ACR Low Pressure Differential SmartReader Plus 4 data logger is designed to be used in applications where precise and very low differential pressure measurements are required.
Required with Temperature Data Logger
>> TrendReader 2 software
Required for Ethernet Connectivity
>> TrendReader 2 Software with USB Cable Kit (#TR2-USB)
>> Read the Networking and Remote Communications Guide
NOTE: NIST Calibration is available.
Large Quantity Discounts Are Available!
SmartReader Plus 4 Logger Features
- Extremely Accurate
- 10 Year Battery Life
- Data Storage Capacity of 21,500 Readings
- 2 Channels
SmartReader Plus 4 Logger Specifications
General Specifications | |
---|---|
Channels | Two (one for the internal temperature sensor and one for the internal pressure sensor) |
Memory Size | 32 KB (21,500 readings) |
Size | 107 x 74 x 22 mm. (4.2” x 2.9” x 0.9”) |
Weight | 110 grams (3.75 ounces) |
Case Material | Noryl Plastic |
External Connector | Removable screw-type terminal strip with Common (-) connection |
Operating Limits | -40°C to 70°C (-40°F to 158°F) and 0 to 95% Relative Humidity (non-condensing) |
Clock Accuracy | ±2 seconds per day |
Battery | 3.6 volt Lithium, 1 Amp-Hour |
Battery Life | 10 year warranty (under normal use), factory replaceable |
Power Consumption | 5 to 10 microamps (continuous) |
Sampling Methods | 1. Continuous (First-in, First-out – not available with sample rates faster than 8 seconds) 2. Stop when full (Fill-then-stop) |
Sampling Rates | User selectable rates from 25 per second to 1 reading every 8 hrs. (BP-101 Battery Pack or PS-201 Power Supply required for sample rates faster than 8 seconds) |
Resolution | 12 bit (1 part in 4,096) |
Mounting | Magnetic backing or locking eyelet |
Software Compatiblity | Windows 3.1, 95, 98, 2000, ME, NT, XP, Vista (32-bit), Windows 7 (32-bit and 64-bit) |
Software Requirements | TrendReader Software and Interface Kit |
Product Approvals | Meets Part 15 for Digital Devices of the Code of Federal Regulations of the Federal Communications Commission (FCC). Meets radiated and conducted emission require ments for the Interference Causing Equipment Standard for Digital Apparatus of Industry Canada (ICES-003). IEC801-2, 3, 4 and EN55011 covering ESD, RFI Immunity, EFT/Burst and Radiated Emissions respectively for the Commission of the European Communities (CE). |
Resistance to X-Rays | Tested for protection against a 160kV dose @ 5mA for 30 seconds (150mA-sec) @ 38 inches F.F.D. (about 100 times that of an airport x-ray machine). Tested for protection against Gamma Ray (equivalent to 0.137-1.38 mega volts) IR 192 - 28 curies @ 30 second exposure source to object distance 5”. |
Pressure Sensor | |
---|---|
Type | Silicon piezoresistive strain gauge |
Media | Non-corrosive gases and dry air |
Maximum Pressure | Four times full scale |
Pressure Sensor Ranges Available | ||
---|---|---|
Range | Accuracy | Resolution |
± 0.5" WC (± 120 Pa) | ± 0.05" WC (± 2.5 Pa) | < 0.001" WC (0.25 Pa) |
± 1" of WC (± 250 Pa) | ± 0.05" WC (± 2.5 Pa) | < 0.001" WC (0.25 Pa) |
± 2" of WC (± 500 Pa) | ± 0.05" WC (± 2.5 Pa) | < 0.001" WC (0.25 Pa) |
± 5" of WC (± 1.2 kPa) | ± 0.1" WC (± 12.5 Pa) | < 0.01" WC (2.5 Pa) |
± 10" of WC (± 2.5 kPa) | ± 0.1" WC (± 12.5 Pa) | < 0.01" WC (2.5 Pa) |
Internal Temperature Sensor | |
---|---|
Type | Negative Temperature Coefficient Thermistor. 10,000 ohms @ 25°C (77°F) |
Accuracy | ± 0.2°C, over the range of 0 to 70°C (±0.3°F over the range of 32 to 158°F) |
Range | -40 to 70°C (-40 to 158°F) |
Resolution | 0.03°C (0.05°F) at 25°C (77°F). Better than 0.07°C (0.12°F) between -25°C (-13°F) and 70°C (158°F). Better than 0.13°C (0.23°F) between -40°C (-40°F) and -25°C (-13°F) |
SmartReader Plus 4 Logger Application Notes (pdf)
Fast Sampling with Battery Pack or External 120 Volt Power Supply
For sampling rates faster than once every 8 seconds, the Smart Reader Plus data loggers require the use of an external 120 volt power supply (#PS-201) or fast sampling battery pack (#BP-101).
The fast sampling battery pack has replaceable "AAA" batteries and 8" (20cm) cable attached, with a male stereo jack on the end. The stereo jack is plugged into the communication port on the Smart Reader Plus data logger.
The 120 Volt Power Supply is required when network length is greater than 50' , more than 3 loggers are on the network, or for sampling rates greater than 8 seconds on the SmartReader Plus Loggers.
Description | Part Number | |||
SmartReader Plus 4 32KB, 2-channels: one differential pressure 2" WC, one temp (Limited Quantity 1 Available) | SRP-004-LPD-2--U-- | |||
SmartReader Plus 4 32KB, 2-channels: one differential pressure 0.5" WC, one temp | SRP-004-LPD-0-5 | |||
SmartReader Plus 4 32KB, 2-channels: one differential pressure 1" WC, one temp | SRP-004-LPD-1 | |||
SmartReader Plus 4 32KB, 2-channels: one differential pressure 2" WC, one temp | SRP-004-LPD-2 | |||
SmartReader Plus 4 32KB, 2-channels: one differential pressure 5" WC, one temp | SRP-004-LPD-5 | |||
SmartReader Plus 4 32KB, 2-channels: one differential pressure 10" WC, one temp | SRP-004-LPD-10 | |||
Software Kit - 1 Required | ||||
TrendReader 2 Software with RS-232 Cable (IC-101) and Manual for Smart Reader series | TR2-RS232 | |||
TrendReader 2 Software with USB Interface Cable (IC-102) and Manual for Smart Reader series | TR2-USB | |||
TrendReader 2 Software CD Only (interface cable and manual not included), for SmartReader Plus, Smart Reader, IAQ and OWL Loggers | TR2-Standard | |||
Standard NIST Calibration Service | ||||
Standard NIST Temperature Calibration (1 Point) Note: 3 to 5 Day Lead Time for All Calibration Orders | CAL-NIST-TEMP | |||
Optional Accessories | ||||
Fast Sampling Battery Pack | BP-101 | |||
Network/Fast Sampling Power Supply - 120V - North American Version | PS-201-NA | |||
Network/Fast Sampling Power Supply - 220V - European Version | PS-201-EU | |||
Extra RS-232 Interface Cable for SmartReader, SmartReader Plus and Nautilus loggers | IC-101 | |||
USB Serial Adapter | CABLE-USB232 |