HOBO Temperature Logger

The HOBO Indoor Temperature Data Logger is a basic 1 channel temperature recorder. The logger will measure and record up to 7,943 temperature readings. The data logger features a user selectable sampling interval of 0.5 seconds to 9 hours, programmable start time/date, nonvolatile EEPROM memory which retains data even if battery fails, extendable internal temperature sensor and user-replaceable 1 year battery.

Included with Data Logger 
>> Mounting Kit (Hook/Loop, Magnet, and Tape)

Required with the Data Logger
>> BoxCar Software Kit

NOTE: NIST Calibration is available.
Large Quantity Discounts Are Available!

Indoor Temperature Data Logger Features

  • Indoor Data Logger with Internal Temperature Sensor
  • Internal Temperature Sensor on 4" Wire can Extend from Case
  • Readout and Relaunch Logger with Optional HOBO Shuttle
  • Programmable Start Time/Date
  • Nonvolatile EEPROM Memory Retains Data Even If Battery Fails
  • Blinking LED Light Confirms Operation
  • Battery Level Indication at Launch
  • Requires BoxCar Software Kit for Operation and Data Manipulation

Indoor Temperature Data Logger Specifications

Data Storage Capacity 7,943 8-bit Samples/Readings
Sampling Rate 0.5 Second to 9 Hours (User Selectable)
Operating Range Temperature: -20°C to 70°C (-4°F to 158°F)
Humidity: 0 to 95% RH non-condensing, non-fogging
Operating Modes Stop When Full
Wrap-Around When Full
Temperature Sensor Range: -4°F to 158°F (-20°C to 70°C)
Range Outside Case: -40°F to 248°F (-40°C to 120°C)
Accuracy: ±1.27°F (±0.7°C) at +70°F
Resolution: 0.7°F (0.4°C) at +70°F
Response Time (Sensor Inside Case): 15 min.
Response Time (Sensor Outside Case): 1 min.
Drop Proof Up to 5 ft.
Time Accuracy ±1 Minute per Week (±100 ppm at 20°C or 68°F)
Storage Range Temperature: -40°C to 75°C (-40°F to 167°F)
Battery 3-Volt CR-2032 Lithium Battery (User Replaceable)
Battery Life Typically 1 Year
Standards Compliance CE
Weight 29 grams (1 oz)
Dimensions 61mm x 48mm x 20mm (2.4" x 1.9" x 0.8")

Description Part Number Qty 10+
HOBO Temperature Logger H08-001-02 call
Software Starter Kits - 1 Required
BoxCar Pro 4.3 Software and Serial Cable Kit BCP4.3-ON call
BoxCar 3.7 Software and Serial Cable Kit BC3.7 call
Standard NIST Calibration Service
Standard NIST Temperature Calibration (1 Point) Note: 3 to 5 Day Lead Time for All Calibration Orders CAL-NIST-TEMP call
Optional Accessories
USB Serial Adapter CABLE-USB232 call
Extra/Replacement Batteries (pack of 5) - CR2032 Lithium Batteries HRB-TEMP-5 call
Extra Serial Interface Cable Cable-PC-3.5 call
Glacier Clear Xtreme Protective Case (3.93" x 2.4" x 0.94") T1000.1 call
Blue Xtreme Protective Case (3.93" x 2.4" x 0.94") T1000.4 call