Supco 2 Channel Data Logger with External Sensors for Temperature and Pressure
The LOGiT pressure and temperature data logger is a 2 channel data logger with external sensors.
The logger features alarms, fast sampling rate of 1 second, 21,500 data storage and minimum 18 month battery life.
Included with each Pressure and Temp Logger
>> Temperature Sensor
>> Pressure Sensor
Required with each LOGiT Data Logger
>> LOGiT Software (#LLS or #LLSU)
>> 9 Volt Battery
NOTE: NIST Calibration is available.
Large Quantity Discounts Are Available!
LOGiT Temperature and Pressure Logger Features
- 2 Channels: External Sensors for Temperature and Pressure
- Store up to 21,500 Samples
- Sampling Rate of 1 Second to 18 Hours
- High and Low Alarms
- Single Point Offset Calibration through Software
- Requires LOGiT Software and 9 Volt Battery
LOGiT Temperature and Pressure Logger Specifications
Data Storage Capacity | 21,500 Samples (1 Channel: Temperature or Pressure) 10,750 Samples (2 Channels) |
Sampling Rate | 1 Second to 18 Hours |
Alarms | Over and under alarms for pressure and temperature |
Temperature Range External Sensor | -40°F to 150°F (-40°C to 65°C) |
Temperature Accuracy | ±1°F(0.5°C) |
Temperature Resolution | 0.1°F (0.05°C) |
Time Accuracy | ±100ppm @ 75°F |
Pressure Range | 0 - 500 psi |
Pressure Accuracy | ±3 psi |
Pressure Resolution | 0.15 psi |
Pressure Connection | 1/4" NPT pressure sensor connection |
Power Source | 9V Alkaline or Lithium Battery (Sold Separately) |
Battery Life | 19 months using alkaline battery 38 months using lithium battery |
Operating Temperature Range | 9V Alkaline: 32°F to 140°F (0° C to 60° C) 9V Lithium: -40°F to 150°F (-40° C to 65° C) |
Operating Humidity Range | 0% to 95% RH, non-condensing |
Storage Temperature | -40°F to 170°F (-40°C to 77°C) |
Calibration | Single point offset calibration available through software. Pressure is factory calibrated. |
Software Compatibility | Windows XP, Vista and Windows 7 (32-bit and 64-Bit) |
Dimensions | 3" x 2.5" x 1.1" (7.6cm x 6.4cm x 2.8cm) |
Weight | 2.5oz (71g) |
Description | Part Number | |||
LOGiT Pressure and Temperature Logger | LPT | |||
Software and Interface Kit - 1 Required | ||||
LOGiT PC Software and Serial Interface Cable Kit (Includes Software, Serial Cable and LINT Interface) | LLS | |||
LOGiT PC Software and USB Cable Kit (Includes Software, USB Cable and LINTU Interface) | LLSU | |||
Battery - Required | ||||
9 Volt Lithium Battery, 1200 mAH | U9VL-FP | |||
Standard NIST Calibration Service | ||||
Standard NIST Temperature Calibration (1 Point) Note: 3 to 5 Day Lead Time for All Calibration Orders | CAL-NIST-TEMP | |||
NIST Pressure Calibration | CAL-NIST-PR | |||
NIST Calibration for 1 Additional Pressure Point | CAL-NIST-PR+ | |||
Optional Accessories | ||||
Supco USB Serial Adapter for Supco Data Loggers | USBS | |||
Replacement USB Interface Cable for LOGiT Data Loggers | 19449 |
- Compressor run cycles
- Pneumatic air lines
- Superheat measurements
- Testing new installations
- Tracking intermittent problems