>> Accepts (1) State, Pulse, Event or Runtime Input Sensor
>> Stores 86,650 or 346,795 (w/ Extended Memory Option) Measured Readings
>> State, Event and Runtime Data Sampling up to 1 Hz
>> Includes Input Cable, Command™ Strip, Double-Sided Tape, Hook & Loop Strap and Magnet
The HOBO® Time of Use State Data Logger is a multi purpose logger that is able to monitor a variety of parameters. Using the HOBOware software, you can set up the logger to monitor a single channel of State, Event, Pulse or Runtime monitoring. The state logger will also accept a contact closure input and the optional AC current switch (#CSV-A8) can be used for accurate AC motor "On and Off" monitoring.
Available in two memory configurations, the base model will store 84,650 samples and the expanded memory model will store 346,795 samples.
The HOBO State Data Logger System Requires:
>> HOBOWare Software (Version 3.3+)
State Data Logger Specifications
| Data Channels | 1 External Input Accepting Event, Kilowatt Hours, Motor On/Off, Pulse Input, Runtime, State Open/Close and Waterflow Sensor |
| Pulse | Maximum Frequency: 50 Hz Resolution: 1 Pulse Lock Out Time: 0 to 1 Second in 100 ms Steps |
| Event | Maximum Frequency: 1 Hz Resolution: 1 Event Lock Out Time: 0 to 1 Second in 100 ms Steps |
| State | Maximum Frequency: 1 Hz Resolution: 1 State Change |
| Run Time | Maximum Frequency: 1 Hz Resolution: 1 Second |
| Sampling Rate | 1 Second to 18 Hours, 12 Minutes, 15 Seconds |
| Data Storage Capacity | UX90-001: 84,650 Measurements UX90-001M: 346,795 Measurements |
| External Contact Input | Electronic Solid State Switch Closure or Logic Driven Digital Signals to 24 Volts |
| Contact Input Range | USB Powered: 0 Volts DC to 3 Volts DC Battery Powered: 0 Volts DC to 2.5 Volts DC |
| Solid State Switch Closure | Input Low: <10 KΩ Input High: > 500KΩ |
| Internal Weak Pull-Up | 100 KΩ |
| Download Time | UX90-001: 10 Seconds When Full UX90-001M: 30 Seconds When Full |
| Input Impedance | Solid State Switch Closure: 100KΩ Pull Up |
| Power Source | (1) CR2032 Lithium Coin Cell Battery |
| Battery Life | 1 Year Note: Logging @ 1 Minute and Normally Open Contacts |
| LCD Display | Readings Visible in 0°C to 50°C (32°F to 122°F) Range Note: Display may React Slowly or Go Blank in Temperatures Outside Range Display Shows: Logger Status; Battery Level Status; Storage Capacity; Calibration Status; Current Time |
| Communication Type | USB Cable Connects Data Logger to PC Computer |
| Operating Range | Temperature: -20°C to 70°C (-4°F to 158°F) Humidity:0 to 95% RH (Non-Condensing) |
| Time Accuracy | ±1 Minute per Month @ 25°C (77°F) |
| Software Compatibility | Windows: XP, Vista and Windows 7 (32-bit and 64-Bit) Mac: OS X 10.5.x, 10.6.x and 10.7.x |
| Standards Compliance | CE, IP50 |
| Weight | 23 g (0.81 oz) |
| Dimensions | 3.66 cm x 5.94 cm x 1.52 cm (1.44" x 2.34" x 0.6") |
| Part # | UX90-001 |
| Base Price | |
| Data Storage Capacity |
HOBOWare Software is Required with the HOBO Time of Use State Data Logger
 |
HOBOware Lite Software Kit >> Logger Management, Data Graphing and Data Analysis
>> Includes Software, USB Interface Cable and Getting Started Guide >> Compatible with Windows and Mac Operating Systems |
Part #: BHW-LITE-CD | ||||||
|
HOBOware Pro Software Kit >> Logger Management, Data Graphing and Data Analysis
>> Includes Software, USB Interface Cable and Getting Started Guide >> Compatible with Windows and Mac Operating Systems >> Supports Data Shuttles, Data Assistants, Plugins and Weather Stations |
|