Powerscout 18 Energy Meter - DATA LOGGER MALAYSIA OFFICIAL DISTRIBUTOR | DATA LOGGER MALAYSIA OFFICIAL DISTRIBUTOR

Powerscout 18 Energy Meter

 

 The PowerScout 18 Power Meter can measure over 50 energy and power parameters. PowerScout features PhaseChek™ LED indicators, line-powered 60 to 600 volt Phase-Phase power supply, industry-standard modbus communications for connecting to building automation and controls system over RS-422/485 and up to 254 powerscout meters can be connected a remote terminal for data collection and analysis.

2 Versions of PowerScout Available

>> 18 Channel w/ Indoor Enclosure (#PS18-D) 
>> 18 Channel (Circuit Board Only - #PS18-N)

Required with PowerScout Meters

>> Software Communication Package (#PS-COMPAK-USB)
>> Current Transformer(s)

NOTE: Large Quantity Discounts Are Available!

Features

  1. Monitor Voltage, Current, Power and Energy of a Single or three-phase Circuit
  2. 50 Measured Parameters for Energy Measurement, Monitoring and Diagnostics
  3. Available in 3 or 18 Channels for Multi-Circuit or Branch-Circuit Monitoring
  4. Single or 3-Phase Energy and Power Meter for Submetering Applications
  5. Data Updates Occur Every 0.5 Seconds
  6. Line Powered 60 to 600 Volt Phase-Phase Power Supply
  7. PhaseChek™ Feature Simplifies and Verifies Correct CT Orientation During Installation
  8. Requires ViewPoint™ Software Communications Package and Current Transformers (CTs)
Description Part Number Qty 10+
PowerScout 18 w/ Indoor Enclosure PS18-D call
PowerScout 18 w/ NO Enclosure - Circuit Board Only PS18-N call
Software Communications Package - Required
Powerscout Communications Pack (Includes Viewpoint Software, USB-RS485 Adapter Assy and Manual) PS-COMPAK-USB call
Current Transformers - Minimum 1 Required
Split Core AC Current Sensors w/ .40" Opening Split Core AC Current Sensors w/ .40" Opening
>> Inside Diameter: 0.40"
>> Output: 0.333 AC Volts
>> 8 ft Twisted Pair Lead
>> Available Rated Amps: 5, 10, 15, 20, 25, 30, 50, 75
Part #: SCT-0400
Split Core Current Transformer w/ 0.75" ID Split Core Current Transformer w/ 0.75" ID
>> Inside Diameter: 0.75"
>> Output: 0.333 AC Volts
>> 8 ft Twisted Pair Lead
>> Available Rated Amps: 5, 10, 30, 50, 70, 100, 150, 200
Part #: CTS-0750
Mini-Hinged Split Core Current Transformer Mini-Hinged Split Core Current Transformer
>> Range: 0 to 50 Amps
>> ID Opening: 0.4" (10 mm)
>> Output: 0.333 AC Volts; 6.66 mV/A AC
>> 8 ft 20 AWG Leads, Unterminated
>> Frequency Range: 50 to 400 Hz
>> Note: 1 Per Phase. 3 CTs Needed for 3-Phase Monitoring
Part #: CT-HSC-050-U
Split Core Current Transformer w/ 1.25" ID Split Core Current Transformer w/ 1.25" ID
>> Inside Diameter: 1.25"
>> Output: 0.333 AC Volts
>> 8 ft Twisted Pair Lead
>> Available Rated Amps: 50, 70, 100, 150, 200, 250, 300, 400, 600
Part #: CTS-1250
Split Core Current Transformer w/ 1.25" ID Split Core Current Transformer w/ 2.00" ID
>> Inside Diameter: 2.00"
>> Output: 0.333 AC Volts
>> 8 ft Twisted Pair Lead
>> Available Rated Amps: 100, 200, 300, 400, 600, 800, 1000, 1200, 1500
Part #: CTS-2000
Rogowski Coil AC Current Sensors Rogowski Coil AC Current Sensors
>> Length: 18" Rope CT
>> Output: 0.333 AC Volts
>> 8 ft Twisted Pair Lead
>> Available Rated Amps: 250, 400, 500, 800, 1000, 1500, 2000, 2500, 3000, 4000, 5000 and 10000

Part #: RCT-1800

Accessories
USB-RS-485 Adapter Assembly PS-USB-485-ADPT call
ViewPoint Software on CD VP-SW call
Powerscout-Viewpoint Manual PS-MAN call

Specifications

Technical Specifications
Service Type Single Phase, Split Phase, Three Phase, Three Phase Delta, Four Wire (WYE)
Power From L1 Phase to Neutral Wire. 0.5 Watts; Internal Fuse Protection
3 Voltage Channels 60-600 Volts AC, Higher AC Voltages can be Measures with A Potential (Voltage) Transformer
3 Current Channels 0-5,000+ Amps depending on Current Transformer
Measurement Type True RMS Using High Speed Digital Signal Processing (DSP)
Line Frequency 50 and 60Hz
Waveform Sampling 13 kHz Voltage and Current
Measurements Volts, Amps, kW, kWh, kVAR, kVARh, kVA, kVAh
Apparent Power Factor (aPF)
Displacement Power Factor (dPF)
All Parameters for Each Phase and for System Total
Accuracy Better than 1% (<0.5% typical) for V, A, kW, kVAR, kVA, PF excluding Sensor
Resolution Adjustable, 0.1 Amp, 0.1 Volt, 1 Watt, 1 VAR, 1VA, 0.01 Power Factor Typical
Indicators 3 LEDs for Setup, 1 per Phase: Green when Voltage and Current on the same Phase, Red when Incorrectly wired (PhaseChek™, Patent Pending)
Communication Specifications
Direct Modbus Over RS-485
Modbus Framing RTU (Binary)
Communication Rate 9600 Baud
Data Bits 8
Parity None
Stop Bit 1
Data Formats Modbus Protocol
Mechanical Specifications
Operating Range Temperature Temperature: -7C to 60C (-20F to 140F)
Humidity: 5% to 95% RH
Enclosure PC UL 94 5V
Weight PowerScout 18 w/o Enclosure: 454 Grams (16 oz.)
PowerScout 18 w/ Enclosure: 1361 Grams (48 oz.)
Dimensions 27.79cm x 18.80cm x 13.00xm (10.94" x 7.40"x 5.12")
(Does Not Include Mounting Brackets)

ModBus Register Assignments

Detailed Register Description
Total Net True Energy (kWh) Individual Phase - Phase Voltages
Instantaneous Total True Power (kW) Line Frequency (Hz)
Peak Demand
(Adjustable Demand Window
15 min Typical) (kW)
Individual Phases True Energy (kWh)
Maximum Instanteous Power (kW) Individual Phases True Power (kW)
Minimum Instanteous Power (kW) Individual Phases Reactive Energy (kVARh)
Total Net Reactive Energy (kVARh) Individual Phases Reactive Power (kVAR)
Total Reactive Power (kVAR) Individual Phases Apparent Energy (kVAh)
Total Apparent Energy (kVAh) Individual Phases Apparent Power (kVA)
Total Apparent Power (kVA) Individual Phases Apparent Power Factor (aPF)
System Displacement Power Factor (dPF) Individual Phases Displacement Power Factor (dPF)
System Apparent Power Factor (aPF) Individual Phases Current (Amps)
Total Current in All Phases (Amps) Individual Phases Line to Neutral Voltages (Volts)
Average Line -- Line Voltage (Volts) Individual Phases Line to Line Voltages (Volts)
Average Line -- Neutral Voltage (Volts) Multiple Meters External data Synchronization

Applications

  • Monitor Energy Loads & Usage
  • Energy / Power Measurement and Verification Studies
  • Energy Demand Profiling and Trending
  • Energy Forecasting Usage