The Supco TAL2 is a 2 channel temperature logger with a built in audible alarm and a set of relay contacts for triggering secondary alarms or attaching to an optional phone dialer / Alarm. The TAL2 can sample as fast as once per second on both channels and stores a total of 32,250 records to the onboard memory. Both temperature sensors can be extended up to 300 feet from the logger with the optional Temperature probe extension wire offered below. The TAL2 comes complete with software, serial connection cable and AC wall outlet. The 9V battery for back-up use is not included.
Each Temperature Alarm Logger Includes
>> Software, RS-232 Serial Cable and AC Adapter
NOTE: NIST Calibration is available.
Large Quantity Discounts available!
Dual Temperature Alarm Logger Specifications
| Temperature | Channels: 2 Temperature Measurement Range: -10°F to 86°F (-25°C to 30°C) Resolution: 0.5°F to 1.0°F (0.3°C to 0.5°C) |
| Sensor Probe | Type: Encapsulated Thermistor Sensor Length: 15 ft Cable (Expandable to 300 ft.) Alarm Memory: Up to 45 Events. Start Time and Duration is Stored |
| Alarm | Over and Under Alarmsd for Each Temp Probe Alarm Delay: 0 to 255 Minutes in 1 Minute Increments |
| Relay Contacts | Normally open (N.O.). Closed on alarm. 48 Volts, 100mA maximum |
| Data Storage Capacity | 32,250 Single Temperature Readings or 16,125 Dual Temperature Readings |
| Sampling Interval | 1 Second to 18 Hours |
| Start Modes | Immediate After Setup or At User Specified Data and Time |
| Recording Mode | Continuous Recording with Rollover Or Stop on Full |
| Real-Time Status | Visual Indication Through the Status LED. Software Real Time Status |
| Real-Time Clock Accuracy | ±100ppm @ 75°F |
| Power Source | 110V AC Power Adapter with Battery Backup |
| Battery Backup | 9V Alkaline Battery (Not Included) |
| Battery Life | 140 Hours with No Alarm. 55 Hours When Alarm is Active |
| PC Interface | RS-232 Serial Communication Cable Connects to PC Computer |
| OS Compatibility | Windows 95, 98, ME, NT, 2000 and XP |
| Exterior Case | Hi-Impact Thermoplastic |
| Operating Conditions | Temperature: 32°F to 140°F (0°C to 60°C) Humidity: 0 to 95% Non-Condensing |
| Storage Conditions | Temperature: -40 °F to 170°F (-40°C to 77°C) Humidity: 0 to 95% Non-Condensing |
| Weight | 2.5 oz. |
| Dimensions | 3" x 2.5" x 1.1" |
 |
Supco Dual Temperature Alarm Logger >> 2 External Temperature Thermistors
>> Alarms with Relay Contacts and 45 Programmable Events >> Includes Software, RS-232 Serial Cable and AC Adapter |
Part #: TAL2 | ||||||
 |
Standard NIST Temperature Calibration Service >> 1 Point Offset Calibration
>> Traceable to NIST >> Certificate Supplied >> Note: 3 to 5 Day Lead Time for All Calibration Orders |
Part #: CAL-NIST-TEMP |
||||||
| Optional Accessories | ||||||||
 |
Autodialer and Alarm Phone Dialer >> Activated by Alarm Contact Relay (Dry Contacts)
>> Pre-Programmed with up to 4 Telephone Numbers >> Automatically Redials Up to 10 Times >> Includes 120 Volt AC 60 Hz Power Adapter |
|
||||||
 |
Supco USB to Serial Adapter >> USB Serial Adapter for Supco Data Loggers
|
Part #: USBS | ||||||
 |
9 Volt Lithium Battery >> Maximum Discharge: 120mA
>> Rating: 1200mAh >> Battery Capacity: 1.2 Ah >> Termination Style: Snaps >> Size: 1.02" x 0.67" x 1.92" |
Part #: U9VL-FP | ||||||
|
25 ft. Extension Wire >> 25 ft Temperature Probe Extension Wire
|
Part #: SW25 | ||||||
|
50 ft. Extension Wire >> 50 ft Temperature Probe Extension Wire
|
Part #: SW50 | ||||||
|
75 ft. Extension Wire >> 75 ft Temperature Probe Extension Wire
|
Part #: SW75 | ||||||
|
100 ft. Extension Wire >> 100 ft Temperature Probe Extension Wire
|
Part #: SW100 | ||||||