TandD Temp Logger w/ Infrared or Optical Communications Options
>> -60°C to 155°C Temperature Measurement Range With 0.3°C Accuracy Over -20°C to 80°
C Range
>> Battery-Powered with 4 Year Battery Life
>> Stores up to 16,000 Sample Readings on Logger and Data Collector Downloads Data
>> Blinking Visual LED Indicator When Upper or Lower Alarm Thresholds are Met
>> Measurement Sampling Rate of 1 Second to 60 Minutes
>> LCD Display Shows Current Temperature Readings, Battery Level, Storage Level and Alarm Status
>> Includes Flourpolymer-Coated Sensor (#TR-5106), Battery, Tube, Strap and User Manual
TandD Optical Temperature Data Logger Specifications
Measurement Channel | 1 External Temperature Channel |
Temperature | Range: -60°C to 155°C Accuracy: ±0.3°C (-20°C to 80°C); ±0.5°C (-40°C to -20°C); ±0.5°C (80°C to -110°C); ±1.0°C (-60°C to -40°C); ±1.0°C (110°C to 155°C) Resolution: 0.1°C |
Data Storage Capacity | 16,000 Samples/Readings |
Recording Start Method | Immediate or Programmed |
Recording Mode | Endless Loop or One-Time |
Recording Interval | 1,2,5,10,15,20,30 sec / 1,2,5,10,15,20,30,60 min |
LCD Display | Current Temperature, Recording Status, Recording Mode, Infrared Communication Status, Battery Life Warning, Memory Full, Sensor Unconnected, Measurement Range Exceeded, Upper / Lower Limit Over and Unit of Measurement (°F or °C) |
Communication Interfaces | Optical or Infrared Communication Infrared Type: IrPHY 1.2 Low Power |
Communication Interfaces | At Full Storage Capacity Using Compatible Data Collectors Optical: 24 Seconds (w/ #TR-57DCI); 20 Seconds (w/ #TR-50U); 160 Seconds (w/ #TR-57U) Infrared: 55 Seconds (w/ #TR-57DCI) |
Alarm | Visual Flashing LED Indicator for Setting Upper and Lower Limits |
Power | 1 LS14250 Lithium Battery |
Battery Life | Approx. 4 Years (2 Years if Infrared Communications Selected) (Depends on measurement environment, recording interval and battery performance) |
Standards Compliance | IP64 (Splash Resistant) |
Weight | 55g with Battery (without Sensor) |
Dimensions | 62mm x 47mm x 19mm |
Temperature Data Logger with External Probe >> Single Channel Temp Data Logger with External Sensor
>> Measurement Range: -60°C to +155°C >> 4-Year Battery Life >> Includes Sensor, Battery and User Manual >> Requires Communication and Software Set (#TR-57DCI or #TR-50U) |
Part #: TR-52I | |
Optional NIST Calibration Service | ||
Standard NIST Temperature Calibration Service >> 1 Point Offset Calibration
>> Traceable to NIST >> Certificate Supplied >> Note: 3 to 5 Day Lead Time for All Calibration Orders |
Part #: CAL-NIST-TEMP |
Optional Accessories
TandD Temperature Sensor Extension Cable >> 3.0 Meter (120") Extension Cable
>> An Error Factor of ±0.3°C @ Normal Temperatures and ±0.5°C @ -50°C is Expected for Each Length of Extension Cable Used. Calibration Service is Recommended if Adding More Than 1. >> Compatible with TandD External Temperature Sensors |
Part #: TR-2C30 | |
Wall Mount for RTR-5 and RTR-500 Series Loggers >> Material: Polycarbonate
>> Dimension: 66mm x 70mm x 24.7mm >> Screw Holes: (2) - 4.2mm >> Includes (2) Lock Screws and (1) Double-Sided Adhesive Tape >> NOTE: Cracks May Develop If Exposed to Strong Impact at temperature of -30C or Less |
Part #: TR-05K3 | |
Maintenance Set >> Includes Rubber Packing, Silica Gel, Double-Sided Adhesive Tape, and Lock Screws
|
Part #: TR-00P1 | |
Battery Set for Low-Temperature Use >> Includes Lithium battery, Tube and Maintenance Set
|
Part #: TR-11P2 | |
Locking Protective Wall Cover >> Clear Plastic
>> Dimension: 3 7/8" x 3 1/2" x 2 1/2" >> Vertical or Horizontal Mounting >> Includes Locking Key and Mounting Hardware |
Part #: BTG-EK |
Optional Sensors
Flexible 24" Temperature Sensor >> Flexible Fluoropolymer Coated Sensor with Excellent Chemical and Corrosion Resistance
>> Cable Length: 0.6 Meters (24 Inches) >> Temperature Range:-60°C to 155°C (-76°F to 311°F) >> Temperature Accuracy: ±0.3°C Avg @ -20°C to 80°C >> Sensor Response Time: 15 Sec (Air); 2 Sec (Agitated Water) >> Compatible with: TR-52, RTR-52, RTR-502 Data Loggers |
Part #: TR-5106 | |
Flexible 1.8" Temperature Sensor >> Flexible Fluoropolymer Coated Sensor with Excellent Chemical and Corrosion Resistance
>> Cable Length: 45 mm (1.8 Inches) >> Range: 60°C to 155°C (-76°F to 311°F) >> Accuracy: ±0.3°C Avg @ -20°C to 80°C Range >> Response Time: 15 Seconds (Air); 2 Seconds (Agitated Water) >> Compatible with TandD TR-52, RTR-52 and RTR-502 Data Loggers |
Part #: TR-5101 | |
Stainless Steel Temperature Probe >> 7.2" Stainless Steel Probe
>> Cable Length: 2 Meters (80 Inches) >> Range: -60°C to 155°C (-76°F to 311°F) >> Accuracy: ±0.3°C Avg @ -20°C to 80°C Range >> Response Time: 36 Seconds (Air); 7 Seconds (Agitated Water) >> Compatible with TandD TR-52, RTR-52, RTR-502 Data Loggers |
Part #: TR-5220 | |
Stainless Steel Temperature Probe w/ Tapered End >> 2.7" (70mm) Stainless Steel Tapered End Probe
>> Cable Length: 2 Meters (80 Inches) >> Range: -60°C to 155°C (-76°F to 311°F) >> Accuracy: ±0.3°C Avg @ -20°C to 80°C Range >> Response Time: 12 Seconds (Air); 2 Seconds (Agitated Water) >> Compatible with TandD TR-52, RTR-52, RTR-502 Data Loggers |
Part #: TR-5320 | |
Stainless Steel Temperature Probe w/ Pointed End >> 2.7" (70mm) Stainless Steel Pointed End Probe
>> Cable Length: 2 Meters (80 Inches) >> Range: -60°C to 155°C (-76°F to 311°F) >> Accuracy: ±0.3°C Avg @ -20°C to 80°C Range >> Response Time: 12 Seconds (Air); 2 Seconds (Agitated Water) >> Compatible with TandD TR-52, RTR-52, RTR-502 Data Loggers |
Part #: TR-5420 | |
Water Immersible Temperature Sensor >> 3.9" Stainless steel Probe Protected with Fluoropolymer Coated Mold for Excellent Chemical and Corrosion Resistance
>> Cable Length: 3 Meters (120 Inches) >> Range: -60°C to 155°C (-76°F to 311°F) >> Accuracy: ±0.3°C Avg @ -20°C to 80°C Range >> Response Time: 120 Seconds (Air); 6 Seconds (Agitated Water) >> Compatible with TandD TR-52, RTR-52, RTR-502 Data Loggers |
Part #: TR-5530 |
Data Collectors - 1 Required
Infrared Communications Data Collector >> Downloads Data onto Collector Using Infrared Communications Port
>> Stored Data is Downloaded to PC with USB Cable >> Includes USB Cable, T&D Recorder for Windows Software and User Manual |
Part #: TR-57DCI | |
Optical Communications Set >> Downloads Data onto Collector Using Optical Communications Port
>> Stored Data is Downloaded to PC with USB Cable >> Includes USB Cable, T&D Recorder for Windows Software and User Manual |
Part #: TR-50U2 |
Documentation
TR-52I User Manual (.pdf)
TandD Recorder for Windows Software User Manual (.pdf)