The DataChart 6000 Paperless Recorder is a 6 or12 channel digital recording device capable of measuring DC voltage, current, frequency (pulse) and thermocouple and RTD temperature readings. The paperless recorder features a large TFT color display, screen chart annotation, buillt-in opc server and email client, up to 50 custom displays, ethernet-ready and capable of recording 10 samples per second.
Paperless Recorder Features
- 5.6” Color TFT touch screen
- Intuitive touch screen control with antiglare coating
- Recording speeds from 10 Samples per Second to 24 hours
- Standard DIN enclosure: 144mm x 144mm bezel
- USB and RJ45 Ethernet Port
- Provides 6 or 12 inputs for DC voltage, current, frequency, thermocouples and RTDs
- 4 Pulse/Frequency Inputs Available
- Networkable using Standard Ethernet Port
- FDA 21 CFR Part 11 Compliance Software Available
- Direct On Screen Chart Annotation with Stylus
- Built-in OPC Server and Email Client
- Optional NEMA4 Enclosure for High Temperature and Corrosive Environments with Dirt, Dust, Oil and Water Protection
NOTE: To order or learn more about the DC-6000 Chart Recorder, please email or call 03-78762460 our sales department.
Paperless Recorder Specifications
| Input Resolution | 0.0015% of full scale, 16 Bit | ||
| Input Impedance | >1 Mohm | ||
| Input Channels | 6 or 12 Direct Input Plus 6 Additional Calculated Channels | ||
| Maximum Input | 50 Volts DC | ||
| Isolation | Channel to Channel: 350 Volts DC or RMS AC Channel to Chassis: 2000 Volts DC or RMS AC Isolation Category II: Polution Degree 2 |
||
| Measurement Rate | 10/Second on All Direct Input Channels | ||
| DC Voltage | Range: ±125mV, ±250mV, ±500mV, ±1.00V, ±3.0V, ±6.0V, ±12.0V and ±24.0V Accuracy: Ranges to 1V ±0.06%, Ranges > 1V ±0.1% |
||
| DC Current | Range: 4-20mA, 0-20mA, 10-50mA Accuracy: ±0.15% using external 50 ohm 0.1% 1/4 Watt Shunt |
||
| Thermocouples | Type J,K,T,E,N,S,B Accepted | ||
| RTDs | 2 or 3 Wire Connection Type: 100 Ohm Plt, 200 Ohm Plt, 100 Ohm No, 120 Ohm Ni, 1000 Ohm Ni, 10 Ohm Cu |
||
| Frequency Input (2 or 4 Channels) |
Range: 0 to 5,000 Hz all Channels; 0 to 10,000Hz 1 Channel Accuracy: 0.005% ± 1 digit |
||
| Recording Rate | 10 Samples/Second to 1 Sample/24 Hours | ||
| Media | CompactFlash™ to 2 GB | ||
| Data Storage | Compact Flash or USB Drive: Up to 4GB SD Card (Secure Digital): Up to 4GB |
||
| Display | 5.6" Color CCFL Backlit Active Matrix TFT Liquid Crystal Display | ||
| Display Modes | Graphic Trending (Vertical or Horizontal), Bar Graphs (Vertical or Horizontal), Digital Meter (Large or Small), Alphanumeric Alarm and Event Log | ||
| Power Requirements | 100 to 240 VAC; 50/60Hz 35 VA Max; Optional 24VDC ±15% | ||
| Power Output | Optoinal Isolated 24 VDC @ 120mA Output | ||
| Operating Range | Temperature: 0°C to 50°C Humidity: 10% to 80% RH Non-Condensing |
||
| Standards Compliance | IP65 (Mounted in Panel), NEMA4, EN61010-1, EN61326:2003, CE, (UL and cUL Pending) | ||
| Weight | 7 lbs (depending on options installed) | ||
| OS Compatibility | Windows XP, Vista and Windows 7 (32 and 64-Bit) | ||
DC6000 Paperless Recorder Options
Input Power Options
>> 100/240 VAC 50/60Hz / 125 VDC with Cable & Plug
>> 18-30 VDC
>> 100/240 VAC 50/60Hz / 125 VDC with Screw Terminals
Input Signal Options
>> 6 Total: 4( V, I, TC, RTD), 2( V, I, TC, RTD, Frequency)*
>> 12 Total: 8( V, I, TC, RTD), 4( V, I, TC, RTD, Frequency)*
* Current Inputs Require the Use of 50 Ohm Shunt (#MAS50R)
Output Signal Options
>> None
>> 6 Form A Relay Contact, 0.5 Amp @ 200 VDC, 2 Control Inputs
>> 12 Form A Relay Contacts, 0.5 Amp @ 200 VDC, 2 Control Inputs
Serial Communications (RS232/485) Options
>> None
>> RS232/485 (9 pin "D" Shell Connector)
Transmitter Power Supply Options
>> None
>> 24 VDC, 120 mA Auxiliary Output
Internal Flash Memory Options
>> 512 MB
>> 1 GB
>> 2 GB
FDA 21CFR11 Compliance Option
>> None
>> 21CFR11 Compliance