8 Channel 250 KHz DAQ Module w/ 8 Analog Inputs and 2 Analog Outputs - DATA LOGGER MALAYSIA OFFICIAL DISTRIBUTOR | DATA LOGGER MALAYSIA OFFICIAL DISTRIBUTOR

8 Channel 250 KHz DAQ Module w/ 8 Analog Inputs and 2 Analog Outputs

The USB-1608HS-2AO from Measurement Computing is a high speed USB 2.0 device that offers true simultaneous sampling of up to eight channels of 16-bit single-ended or differential analog input at 250 kHz per channel. Each channel has one A/D converter and can be independently-configured with software for either single-ended or differential input. The input range of each channel can also be configured independently with software.

A 32-bit counter is capable of counting TTL pulses. A synchronization input line (SYNC_IN) allows you to provide an external sampling clock for the analog inputs. A synchronization output line (SYNC_OUT) lets you output the internal or external sampling clock of the USB-1608-HS-2AO analog inputs. An analog trigger lets you start analog input conversions based on the value of a digital or analog signal.

The USB-1608-HS-2AO offers all the same features as the 1608-HS, but adds Two 16-bit, 1 MS/s analog outputs.

USB 8 Channel DAQ includes:

>> 2 Meter Long USB Cable
>> AC Wall Power Adapter (5V, Part # PS-5V2AEPS)
>> Measurement Computing’s DAQ software suite that includes TracerDAQ, The Universal Library, Comprehensive drivers for DASYLab and NI LabVIEW as well as InstaCal software utility for installation, calibration, and testing.

NOTE: Large Quantity Discounts Are Available!

Note: Any order for Measurement Computing Products to be Shipped Outside the US will require an "End User Export Agreement" form to be Completed and Returned Prior to Products being Shipped.

Specifications:

A/D Converters 16-Bit Successive Approximation Type
Sampling Rate 0.0009 Samples/second to 250 kS/s, Software Programmable
Input Ranges ±10V, ±5V, ±2V, ±1V Software Selectable
Throughput Software Paced 33 to 8000 S/s all Channels
Scan to PC Memory (250 kS/s) per Channel Maximum
Number of Channels (8) Single Ended
(8) Differential
Resolution 16 Bits, no missing codes
Memory EEPROM with 65,536 bytes Storage
Counter Type: Event Counter 
Channels: 1 
Input Type: TTL, Rising Edge Triggered
Input Source: CTR Screw Terminal
Input Frequency: 1 MHz Maximum
Resolution: 32 Bits
Analog Output Type: 5 Volts CMOS
Number: 2 
Configuration: 8 Input, 8 Output
Digital I/O Type: 5 Volts CMOS
Number: 16 
Configuration: 8 Input, 8 Output
USB Device Type: USB 2.0 Full-Speed
Compatibility: USB 1.1 and USB 2.0
Cable Length: 3 Meters Maximum
Cable Type: A-B Cable, UL Type AWM 2527
Operating Range Temperature: 0° to 55°C
Humidity: 0 to 90% RH
Storage Range Temperature: -40°C to 85°C
Humidity: 0 to 90% RH
OS Compatibility Windows 7, Vista, XP SP2+ (32-Bit or 64-Bit)
Dimensions 241mm x 125mm x 59mm (9.50" x 4.95" x 2.32")



250 kHz DAQ Module w/ 8 Analog Inputs, 2 Analog Outputs
>> 8 Analog Input Channels
>> 16-Bit Resolution
>> 250 kS/s Total Sample Rate
>> Analog Trigger Input
Part #: USB-1608HS-2AO
Standard NIST DC Voltage Calibration Service Standard NIST DC Voltage Calibration Service
>> 1 Point (per Channel) Offset Calibration
>> Traceable to NIST
>> Certificate Supplied
>> Note: 3 to 5 Day Lead Time for All Calibration Orders

Part #: CAL-NIST-DCVOLT
Voltage: 


TracerDAQ Pro Software TracerDAQ Pro Software
>> Strip Chart, Oscilloscope, Function Generator and Rate Generator Software
>> Create Charts and Export Data
Part #: TRACERDAQ-PRO
Das-Wizard Software for USB DAQ Devices Das-Wizard Software for USB DAQ Devices
>> DAQ Data to Excel Add-on Program
>> Places Measurements directly into an Excel Spreadsheet
>> Supports MCC DAQ Devices: PCI, USB, PC-Card, ISA and PC/104 Boards
>> No data conversion required. Measurements go directly to cells as volts, temperature or A/D counts
Part #: DAS-WIZARD
DASYLab Lite DAQ Software DASYLab Lite DAQ Software
>> Graphical Programming Software Package for Customized Applications Without Writing Code
>> Create Flow Charts Where Functions are Connected By Wires
>> Available in 4 Versions (Lite, Basic, Full and Pro)
>> Includes Hardware Drivers for Measurement Computing DAQ Devices
Part #: DASYLAB-LITE
DASYLab Basic DAQ Software DASYLab Basic DAQ Software
>> Graphical Programming Software Package for Customized Applications Without Writing Code
>> Create Flow Charts Where Functions are Connected By Wires
>> Available in 4 Versions (Lite, Basic, Full and Pro)
>> Includes Hardware Drivers for Measurement Computing DAQ Devices
Part #: DASYLAB-BASIC
DASYLab Basic DAQ Software DASYLab Full DAQ Software
>> Graphical Programming Software Package for Customized Applications Without Writing Code
>> Create Flow Charts Where Functions are Connected By Wires
>> Available in 4 Versions (Lite, Basic, Full and Pro)
>> Includes Hardware Drivers for Measurement Computing DAQ Devices
Part #: DASYLAB-FULL
DASYLab Basic DAQ Software DASYLab Pro DAQ Software
>> Graphical Programming Software Package for Customized Applications Without Writing Code
>> Create Flow Charts Where Functions are Connected By Wires
>> Available in 4 Versions (Lite, Basic, Full and Pro)
>> Includes Hardware Drivers for Measurement Computing DAQ Devices
Part #: DASYLAB-PRO
DASYLab Basic DAQ Software Additional DASYLab Runtime License
>> Graphical Programming Software Package for Customized Applications Without Writing Code
>> Create Flow Charts Where Functions are Connected By Wires
>> Available in 4 Versions (Lite, Basic, Full and Pro)
>> Includes Hardware Drivers for Measurement Computing DAQ Devices
Part #: DASYLAB-RUNTIME