The Monarch Instrument Track-It™ Temperature Data Logger is a stand alone compact data logger that records up to 64,000 samples of temperature data. This compact full featured logger has two
independent triggers that allow it to be started or stopped in a variety of ways. You can start the logger Instantaneous, when an alarm threshold has been crossed, at a specific time and date (start and stop) or via push button start. This advanced features also allows you to record only during the duration the logger is in an alarm state.
The Track-It logger allows for sampling as fast as once every two seconds to once every 24 hours. The Track-It™ Temp Logger can be ordered with or without an LCD display. Information displayed on the LCD is also user programmable and can be sequenced by pressing the logger button. Both models have a multicolored LED indicator to notify user of alarms or general activity. The logger is easily configured using the included Track-It™ Software.
NOTE: NIST Calibration is available.
Large Quantity Discounts Are Available!
Track-It Temperature Data Logger >> Stores 64,000 Total Readings
>> -20°C to 85°C Temperature Range >> Includes Rubber Boot, Track-It Software and Battery |
Part #: 5396-0103 |
|
Track-It Temperature Logger with Display >> Stores 64,000 Total Readings
>> -20°C to 85°C Temperature Range >> LCD Display Shows Current Readings >> Includes Rubber Boot, Track-It Software and Battery |
Part #: 5396-0101 |
|
Optional NIST Calibration Service | ||
Standard NIST Temperature Calibration Service >> 1 Point Offset Calibration
>> Traceable to NIST >> Certificate Supplied >> Note: 3 to 5 Day Lead Time for All Calibration Orders |
|
Optional Accessories
USB Docking Ball Extension >> 5ft USB 2.0 Cable with Upright Stand
>> Handy Extension Cable For All USB Devices |
Part #: USB-DB |
|||||||
CR2032 Batteries >> Pack of 5
|
|
|||||||
Replacement Rubber Sleeve for Track-It Loggers >> Splash-Proof Protective Rubber Cover
>> Included with Temperature and Humidity Track-It Loggers |
Part #: 5396-9903 |
|||||||
Track-It Software on CD |
Part #: 5396-9902 |
|||||||
Locking Protective Wall Cover >> Clear Plastic
>> Dimension: 3 7/8" x 3 1/2" x 2 1/2" >> Vertical or Horizontal Mounting >> Includes Locking Key and Mounting Hardware |
Part #: BTG-EK |
Temperature Logger Specifications
Data Storage Capacity | 64,000 Total Samples/Readings |
Sampling Rate | 2 Seconds to 24 Hours (User-Selectable via Software) |
Temperature | Range: -20°C to 85°C (-4°F to 185°F) Accuracy (0°C to 50°C): ±1.0°C Accuracy (20°C to 85°C): ±2.0°C Resolution: 0.4°C (1.0°F) Repeatability: ±0.1°C (±0.2°F) |
Time Accuracy | ±1 Minute per Year |
Triggers | Number: 2 Independant Triggers Modes: Instanteous, Button Control, On Alarm, Time and Date, Day of Week |
Battery | 3-Volt CR-2032 Lithium Battery (User Replaceable) |
Battery Life | Typically 1 Year @ 1 Minute Sampling Rate |
Operating Modes | >> Continuous >> Start and Stop Using Buttons on Front of Logger >> Start and Stop at Predetermined Date/Time >> Start When Alarm Condition is Sensed |
Display | Not Available on All Models Type: 4 Digit LCD Functions: Temperature, Engineering Units, Alarms, Record Mode, Battery Condition, Time/Data Stamp and Memory |
LED | User Programmable: Alarm Indicator, Recordings and Triggers |
Button | User Programmable: View Display, Record On/Off, Reset Alarms, Reset Timer |
Alarms | (2) User Programmable Visual Alarms. High or Low |
Communications Interface | Direct USB Connection |
Software | Track-It Software Required (Included) |
OS Compatibility | Windows XP, Vista and Windows 7 (32 and 64-Bit) |
Standards Compliance | CE |
Dimensions | 92.9mm x 19.1mm x 29.5mm (3.66" x 0.75" x 1.16") |