Supco Dual Temperature Alarm Logger - DATA LOGGER MALAYSIA OFFICIAL DISTRIBUTOR | DATA LOGGER MALAYSIA OFFICIAL DISTRIBUTOR

Supco Dual Temperature Alarm Logger

 

The Supco TAL2 is a 2 channel temperature logger with a built in audible alarm and a set of relay contacts for triggering secondary alarms or attaching to an optional phone dialer / Alarm. The TAL2 can sample as fast as once per second on both channels and stores a total of 32,250 records to the onboard memory. Both temperature sensors can be extended up to 300 feet from the logger with the optional Temperature probe extension wire offered below. The TAL2 comes complete with software, serial connection cable and AC wall outlet. The 9V battery for back-up use is not included.

Each Temperature Alarm Logger Includes

>> Software, RS-232 Serial Cable and AC Adapter

NOTE: NIST Calibration is available.

Large Quantity Discounts available!

Supco Dual Temperature Alarm Logger Supco Dual Temperature Alarm Logger
>> 2 External Temperature Thermistors
>> Alarms with Relay Contacts and 45 Programmable Events
>> Includes Software, RS-232 Serial Cable and AC Adapter

Part #: TAL2


Standard NIST Temperature Calibration Service Standard NIST Temperature Calibration Service
>> 1 Point Offset Calibration
>> Traceable to NIST
>> Certificate Supplied
>> Note: 3 to 5 Day Lead Time for All Calibration Orders


Part #: CAL-NIST-TEMP

Optional Accessories
Autodialer and Alarm Phone Dialer Autodialer and Alarm Phone Dialer
>> Activated by Alarm Contact Relay (Dry Contacts)
>> Pre-Programmed with up to 4 Telephone Numbers
>> Automatically Redials Up to 10 Times
>> Includes 120 Volt AC 60 Hz Power Adapter
Quantity Price Each
1 - 9  
10+  
Part #: AVD-45


100 ft. Extension Wire Supco USB to Serial Adapter
>> USB Serial Adapter for Supco Data Loggers

Part #: USBS


9 Volt Lithium Battery 9 Volt Lithium Battery
>> Maximum Discharge: 120mA
>> Rating: 1200mAh
>> Battery Capacity: 1.2 Ah
>> Termination Style: Snaps
>> Size: 1.02" x 0.67" x 1.92"

Part #: U9VL-FP


100 ft. Extension Wire 25 ft. Extension Wire
>> 25 ft Temperature Probe Extension Wire

Part #: SW25


100 ft. Extension Wire 50 ft. Extension Wire
>> 50 ft Temperature Probe Extension Wire

Part #: SW50


100 ft. Extension Wire 75 ft. Extension Wire
>> 75 ft Temperature Probe Extension Wire

Part #: SW75


100 ft. Extension Wire 100 ft. Extension Wire
>> 100 ft Temperature Probe Extension Wire

Part #: SW100


Specifications

Temperature Channels: 2 Temperature
Measurement Range: -10°F to 86°F (-25°C to 30°C)
Resolution: 0.5°F to 1.0°F (0.3°C to 0.5°C)
Sensor Probe Type: Encapsulated Thermistor Sensor
Length: 15 ft Cable (Expandable to 300 ft.)
Alarm Memory: Up to 45 Events. Start Time and Duration is Stored
Alarm Over and Under Alarmsd for Each Temp Probe 
Alarm Delay: 0 to 255 Minutes in 1 Minute Increments
Relay Contacts Normally open (N.O.). Closed on alarm. 48 Volts, 100mA maximum
Data Storage Capacity 32,250 Single Temperature Readings or 16,125 Dual Temperature Readings
Sampling Interval 1 Second to 18 Hours
Start Modes Immediate After Setup or At User Specified Data and Time
Recording Mode Continuous Recording with Rollover Or Stop on Full
Real-Time Status Visual Indication Through the Status LED. Software Real Time Status
Real-Time Clock Accuracy ±100ppm @ 75°F
Power Source 110V AC Power Adapter with Battery Backup
Battery Backup 9V Alkaline Battery (Not Included)
Battery Life 140 Hours with No Alarm. 55 Hours When Alarm is Active
PC Interface RS-232 Serial Communication Cable Connects to PC Computer
OS Compatibility Windows 95, 98, ME, NT, 2000 and XP
Exterior Case Hi-Impact Thermoplastic
Operating Conditions Temperature: 32°F to 140°F (0°C to 60°C) 
Humidity: 0 to 95% Non-Condensing
Storage Conditions Temperature: -40 °F to 170°F (-40°C to 77°C) 
Humidity: 0 to 95% Non-Condensing
Weight 2.5 oz.
Dimensions 3" x 2.5" x 1.1"