Extech Clamp-on Datalogger Kit - DATA LOGGER MALAYSIA OFFICIAL DISTRIBUTOR | DATA LOGGER MALAYSIA OFFICIAL DISTRIBUTOR

Extech Clamp-on Datalogger Kit

The LCD screen can display up to two of the following: kW + PF, kVA + PF, V + A, A+Hz, or V + Hz. This logger supports Data Holding, a 25 point memory viewable on display, full function large 4-digit LCD with 40seg. bargraph, Peak Hold, Min/Max and an Auto Power Off feature. 

Included in Power Logger Kit

>> RS-232 Connection Module
>> Windows PC Software
>> Cable
>> Alligator Clips
>> Test Leads
>> 9 Volt Battery
>> Carrying Case

NOTE: Large Quantity Discounts Are Available!

Power Logger Features

1000A Clamp-On Device Measuring 1 or 3 Phase Power Up to 600kW
Large 4-Digit LCD Display
Built in Data Logger Holds Up To 4000 Readings
Connect Directly to a PC and Download to a File
Includes Software, Cable, Test Leads, Alligator Clips and Carrying Case

Description Part Number
Extech 1000A True RMS Clamp-on Power Datalogger Kit 382068
Optional Accessories
Extech 3-Prong AC Line Separator 480172
USB Serial Adapter CABLE-USB232
9 Volt Lithium Battery, 1200 mAH U9VL-FP

Power Logger Specifications


Range
Resolution Basic Accuracy
True Power 600KW 10W ±(2%rdg+5d)
Apparent Power 1000KVA 10VA ±(2%rdg+5d)
Peak Current 1000A 0.1A ±(6%rdg+10d)
Peak Voltage 600V 0.1V ±(6%rdg+10d)
AC Current (40-500Hz) 1000A 0.1A ±(1.5%rdg+5d)
DC Current 1000A 0.1A ±(1.5%rdg+5d)
AC Voltage (40-500Hz) 600V 100mV ±(0.5%rdg+5d)
DC Voltage 600V 100mV ±(0.5%rdg+5d)
Frequency 500Hz 0.1Hz ±(0.5%rdg+5d)
Resistance 10KΩ ±(1%rdg+5d)
Continuity Beeper when < 50Ω
Data Storage Capacity 4,000 Readings
Software Compatibility Windows 95/98/NT/2000/ME/XP
Dimensions 10.2" x 3.7" x 1.8" (260mm x 93mm x 45mm)
Weight 15.9oz (450g)

Measuring the AC Current of Small Appliances

To measure AC amperage using a clamp on meter or probe, you need to wrap around only one of the "hot" wires. If you put both of the hot wires in the sensing element of your meter or probe, the value of each wire will negate that of the other resulting in a value of zero.

Most small appliances have both of the "hot" wires wrapped in a single cord, or at least attached to each other. In order to wrap around only one of these, you would normally need to cut and split the wire. To avoid this, we recommend purchasing the Extech AC Line Splitter (P/N: 480172) which you plug in between your appliance and the electrical outlet. The AC Line Splitter provides two open areas for your to clamp your meter or probe around, one of which boosts the sensitivy by 10 times. View the Specs.

Documentation: (pdf)

1000Amp True RMS Clamp Power Data Logger Data Sheet
1000Amp True RMS Clamp Power Data Logger User Manual