The AEMC Power Quality Meter provides an accurate power analyzing device with the ability to obtain instant measurements of the main characteristics of a single-phase network (voltage, current, power, voltage and current harmonics, etc.) and to monitor machinery in operation (temperature, inrush current and duration of operation, distance of windings and rotational speed). The power quality meter is designed for technicians, control and maintenance engineers, as well as electrical contractors and educators.
Included with each Power Quality Meter:
>> Current Probe with 10 ft. lead and black connector
>> Black and Red 10ft. Voltage Leads and Alligator Clips
>> Optical USB Cable
>> Six (6) 1.5V Batteries
>> Two (2) Safety Test Probes
>> Carrying Bag
>> DataView Software and User Manual
The Power Quality Meter has several probe options:
>> Color-coded 240A MN93 probe (#MN93-BK)
>> Color-coded 1200A SR193 probe (#SR193-BK)
>> Color-coded 6500A 24" AmpFlex™193-24 probe (#193-24-BK)
>> Color-coded 1000A MA193 probe (#MA193-10-BK)
>> Color-coded 6A/120A MN193 probe (#MN193-BK)
Power Quality Analyzer Features
- Measures up to 660Vrms or Vdc
- Measures up to 6500Aac or 1400Adc (probe dependent)
- Displays Min, Max and Average Volts and Amps, Crest Factor, Peak Value and K-Factor
- Calculates and displays Watts, VARs and VA, Power Factor and Displacement Power Factor for single-phase and balanced three-phase
- Displays total harmonic distortion (THD-F and THD-R) for voltage and current
- Displays individual harmonic values and % for Volts and Amps through the 50th harmonic
- Captures, Displays and Stores Inrush Current
- Calculates and displays phase rotation and RPM
- Displays temperature in both °F and °C
- Displays resistance up to 200Ω
- Conducts continuity and diode tests
- Stores up to nine (9) complete sets of readings for all volt, amp, power and harmonic measurements
- Includes DataView Software for data storage, real-time waveform display, analysis and report generation
Power Meter Applications
- Motor Start-up Analysis
- Determine phase rotation and motor RPM
- Detect hot spots in wiring and equipment
- Verification of power distribution circuits
- Measurement and recording of power system quality (kW, VA, VAR)
- Energy metering (kVAh, VARh, kWh)
- In plant troubleshooting of power distribution panels and individual machinery
Power Quality Meter Specifications
| Voltage (TRMS) | Phase-to-Phase: 660V Phase-to-Neutral: 600V |
|
| Current (TRMS) | MN Clamp: 5mA to 100 mA/120A or 2 to 240A MR Clamp: 10 to 1000Aac, 10 to 1400Adc SR Clamp: 3 to 1200A AmpFlex®: 10 to 6500A* |
|
| Frequency (Hz) | 40Hz to 70Hz | |
| Other Measurements | kW,kVAR,PF,DPF,VA, Phase Rotation Temperature, RPM, Resistance, Continuity, Diode Test | |
| Harmonics | 1st to 50th | |
| Sampling Frequency | 256 Samples/Cycle | |
| Data Storage | Stores nine (9) sets of reading for volts, amps, power and harmonics | |
| Power Source | Six (6) NiMH AA rechargeable Battery Pack or Six (6) 1.5V AA Alkaline Batteries AC Supply: 120/320Vac (50/60Hz) |
|
| Battery Life | >8 Hours with Display On >40 Hours with Display Off (Recording Mode) |
|
| Communication Port | Optically Isolated USB | |
| Software | DataView Software (Included) | |
| OS Compatibility | Windows XP, Vista and 7 (32-bit and 64-bit) | |
| Display | Three-line backlit digital display with custom icons | |
| Dimensions | 8.3" H x 4.3" W x 2.4" D (211mm x 108mm x 60mm) | |
| Weight | 1.9 lbs (8.8kg) | |
| Safety Rating | EN 61010, 600V Cat. III, Polution Degree 2 | |
| Description | Part Number | |||
| Handheld Power Quality Meter Accessories | ||||
| MN93-BK probe (240A) with 10ft leads | MN93-BK | |||
| SR193-BK Probe (1200A) with 10 ft Leads | SR193-BK | |||
| 24" AmpFlex 193-24-BK Probe ( 6500A) with 10 ft Leads | 193-24-BK | |||
| MN193-BK Probe (6A/120A) with 10 ft Leads | MN193-BK | |||
| Optional NIST Calibration | ||||
| Standard NIST DC Voltage Calibration (1 Point) Note: 3 to 5 Day Lead Time for All Calibration Orders | CAL-NIST-DCVOLT | |||
| Standard NIST 4-20mA Calibration (1 Point) Note: 3 to 5 Day Lead Time for All Calibration Orders | CAL-NIST-420MA | |||
Documentation: (pdf)