Light Meter and Data Logger - DATA LOGGER MALAYSIA OFFICIAL DISTRIBUTOR | DATA LOGGER MALAYSIA OFFICIAL DISTRIBUTOR

Light Meter and Data Logger

 

>> Lux Range 2,000; 20,000; and 100,000
>> Has Photodiode and Color Correction Filters per CIE
>> No Software Required, Data Logs to Optional SD Card
The SD-1128 Light meter with LCD gives immediate access to the current conditions without the need to connect to a pc.
In the home or workplace, a light meter can be used to measure correct light levels to help reduce the amount of waste light. Other general lighting applications include monitoring outdoor light pollution and for plant growing.
Photographers use light meters to determine the correct exposure, and choose the best shutter speed and f-stop. Cinematographers and scenic designers use them in order to appropriately "set the scene".
The meter can also measure temperatures using type J or K thermocouples. Depending on the sensor used, the extremely wide temperature range that can be measured is -100°C to 1700°C (-148°F to +3092°F). Recording to an optional SD card allows data to be saved and exported to MS Excel for analysis.

NOTE: Large Quantity Discounts Are Available!

Light Meter and Data Logger Specifications

Light (2,000 Lux) In-Range Display: 0 to 1,999 Lux (0 to 186Fc)
Accuracy: ±0.4% + 2 Digits (±0.4% + 2.0Fc)
Resolution: 1 Lux (0.1Fc)
Light (20,000 Lux) In-Range Display: 1,800 to 19,990 Lux (167 to 1,860Fc)
Accuracy: ±0.4% + 2 Digits (±0.4% + 2.0Fc)
Resolution: 10 Lux (1.0Fc)
Light (100,000 Lux) In-Range Display: 18,000 to 99,900 Lux (1,670 to 9,290.7Fc)
Accuracy: ±0.4% + 2 Digits (±0.4% + 2.0Fc)
Resolution: 100 Lux (10Fc)
Type K Thermocouple Range: -50°C to 1300°C (-58°F to 2372°F)
Accuracy: ±0.4% + 0.5°C (±0.4% + 1.0°F)
Resolution: 0.1°C (0.1°F)
Type J Thermocouple Range: -50°C to 1200°C (-58°F to 2192°F)
Accuracy: ±0.4% + 0.5°C (±0.4% + 1.0°F)
Resolution: 0.1°C (0.1°F)
External Inputs (1) Light Sensor - Included
(1) Thermocouple Input (Type J or Type K) - Sold Separately
Data Storage Capacity 1GB to 16GB onto External SD Card
Sampling Rate 1 Second to 1 Hour
LCD Display Type: Backlight
Size: 52mm x 38mm (2.04" x 1.49")
Download Time Dependent Upon Size of SD Card
Power Source Battery: (6) 1.5 Volt Heavy Duty Alkaline AA
AC/DC Power: 9 Volt Adapter (Optional)
Battery Life Without LCD and SD Card: 155 Hours on Average 
With LCD and SD Card: 35 Hours
Battery Classification Dry Battery, Non-Hazardous
Case Material ABS Plastic
Operating Range Temperature: 0°C to 50°C (32°F to 122°F) 
Humidity: < 85% RH
Standards Compliance CE, IP63, CIE69 (Sensor)
Weight 375 grams (0.83 lbs) Including Sensor
Dimensions Meter: 177mm x 68mm x 45mm (6.9" x 2.6" x 1.7")
Light Sensor: 76.2mm x 50.8mm x 19.05mm (3.0" x 2.0" x 0.75")

 

Light Meter and Data Logger Light Meter and Data Logger
>> Measures Light and Temperature with External Thermocouple (Sold Separately)
>> Data Recorded onto SD Card for Analysis
>> No Software Required for Set-up and Data Download
>> Includes 4GB SD Card
Part #: SD-1128
Optional Accessories
Soft Carry Case with Shoulder Strap Soft Carry Case with Shoulder Strap
>> Dimensions: 22.8cm x 10.16cm x 5.08cm (9.0" x 4.0" x 2.0")
Part #: CA-05A
Soft Carry Case with Shoulder Strap Reed 9 Volts AC/DC Power Adapter
>> Input Voltage: 100 to 240 Volts AC; 50 Hz
>> Output Voltage: 9 Volts DC/ 1 Amp Output
>> Round Plug with 2.5 mm Diameter
Part #: AP-9VA-110V

Documentation (pdf)

Reed Light Meter and Data Logger Datasheet