Other versions available for vehicles without an OBDII port
Models of DriveRight 600E Available:The DriveRight 600E Data Logger monitors and logs vehicle trip information including detailed driver performance data. The interactive LCD display allows you to set speed, acceleration and deceleration limits and to view trip data. An internal audible alarm alerts drivers whenever one of the preset limits has been exceeded. In the event of an accident or sudden stop, DriveRight 600E also records the vehicle speed for each the 20 seconds before and after a sudden deceleration. Two digital inputs allow DriveRight 600E to monitor vehicle functions such as brake lights, headlights, seatbelt use and power take off (PTO) use.
1. DriveRight 600E OBD
2. DriveRight 600E VSS
3. DriveRight 600E GD
4. DriveRight 600E HD
Options Available for DriveRight 600E:
1. Fleet Management Software
2. GPS Module (Requires Part #8127 and 8128)
3. DriveRight SmartCard System
NOTE: Large Quantity Discounts Available!
DriveRight 600E Features
- Logs Speed, Acceleration and Deceleration
- Automatic creation of an accident log when sudden decelaration
- Console automatically stores each of the last 20 second of speed for each of the last 20 trips.
- Allows the monitoring of brake lights, seatbelts, power take off (PTO) switch, and headlights
- Security features designed to protect data and settings
- Monitor Mulitple Drivers
4 Models of DriveRight Available
DriveRight 600E OBD
The Drive Right 600E OBD (Part # 8126OBD) is for vehicles with an OBDII port. It uses the on-board diagnostic port for installation, found on foreign and domestic passenger cars, model-year 1996 and later built for sale in the US and Canada. Some vehicles are excluded. The OBD port was made mandatory in all passenger and light-duty vehicles sold in the USA starting in 1996. The port can be found in some vehicles sold outside of the USA and Canada, but there is no consistent pattern of which makes and models will work, and which won't.
DriveRight 600E VSS
For vehicles with electronic speed sensors (VSS), including most 1994 and later model-years, and some earlier model-years with cruise control. VSS requires a vehicle that produces a pulsing wire that varies with speed. This is a signal commonly used by a vehicle’s cruise control, thus vehicles which have cruise control as an option are likely to have this pulsed wire. The location of the wire varies from vehicle to vehicle and from year to year.
DriveRight 600E GD
For vehicles without VSS sensors. Mounts on the vehicle's driveshaft or CV joint. General-duty model for most cars, light-duty vans, and pickup trucks.
DriveRight 600E HD
Mounts on the vehicle's driveshaft or CV joint. Heavy-duty model for large trucks, busses, and off-road vehicles.
GD and HD consist of a reed-switch sensor and a magnet that is mounted on a driveshaft or other spinning point on a vehicle. The reed switch counts the revolutions of the magnet, and reports that pulse to the console. The installer calibrates each console to match the frequency of the revolutions to the vehicle’s speed.
DriveRight Additional Options
The Fleet Management Software provides powerful reporting and data storage capabilities using the data recorded by the DriveRight 600E data logger. The optional Fleet Management Software is compatible with five popular database platforms. Learn more about the optional Fleet Management Software.
The GPS Module provides detailed information of a vehicle’s route by recording the latitude and longitude at user programmable interval. The GPS option consists of a Wireless Interface Module (#8127) and the GPS Module (#8128). Compatible with Microsoft MapPoint or Streets & Trips. Learn more about the optional GPS Module.
The DriveRight SmartCard System is a wireless system allowing for quick and easy automatic download to the PC. It authenticates driver ID and simplifies administrative tasks. Drivers just pull into the parking lot and their data is instanteously downloaded and made available.
Data Logger Specifications
Speed | Displays current speed in MPH or km/h Records Maximum Speed for each Trip Records Total Time in which speed exceeded set limit for each trip Accuracy: ±1% |
Acceleration and Deceleration | Displays current acceleration in g's (an acceleration of 22 MPH/sec or 35 km/h/sec) Records number of times acceleration exceeds specified limit for each trip Records number of times deceleration exceeds specified limit for each trip Accuracy: ±5% |
Alarms | Audible alarm for exceeding speed, acceleration, deceleration limits Visible alarm message for exceeding speed, acceleration, and deceleration limits Drive ID/Location ID code entry reminder alarm (requires software to set) |
Distance | Displays and records total distance travelled during current trip in miles or kilometers. Records overall distance (odometer requires software to set) Specifies miles as business, personal, commute or other Accuracy: ±1% |
Time & Date | Displays current date in Month:Day or Day:Month format Displays current time in 12 or 24 hour format Records start and end time for each trip Records total time for each trip Accuracy: ±2 Seconds/Day |
Accident Logs | Records vehicle speed in last 20 seconds before and after deceleration limit exceeded. Stores 10 separate accident logs Stores the last 20 seconds of each of the last 20 trips |
Security | Owner0-specified 4-digit password protects settings and data Tamper indicator message appears if unit is disconnected Tamper indicator appears if incorrect security password is entered 5 times Tamper log stores time and date of last 10 tamper alerts Time and Date of each connect and disconnect is recorded. |
Vehicle Speed Sensor | OBDII port, VSS input or reed switch sensor with magnet for mounting on vehicle driveshaft of rear wheel drive vehicles or on the CV Joint of front wheene drive vehicles |
Lamp | Illuminated Display |
Primary Power | 11 to 18 VDC (12 VDC Nominal) |
Secondary Power | 3-Volt CR123 Lithium Battery allows unit to be removed from car. Battery operating time is approximately 260 Hours when it is disconnected from vehicle. Battery Life is up to 4 months in sleep mode. |
Digital Inputs (Used to monitor operation of brakes, headlights and other 12-volt accessories) |
2 Digital Inputs: Input 1: green wire; Input 2: yellow wire Input Impedance: > 1 Megohm High Input Range: 3 VDC min to system voltage max Low Input Range: -0.5 min to 1.0 VDC max Input 1 Sampling: Start and Stop of Trip, GPS Record, Accident Log Input 2 Sampling: Start and Stop of Trip, GPS Record |
Fuses (1 power & 2 Digital Input) |
3AG, 0.25A, Slo-Blo (1.25" x 0.25" or 6.4 x 31.8mm) |
Temperature | Display Temperature Range: -4°F to 185°F (-20°C to 85°C) Operating Temperature Range: -40°F to 185°F (-40°C to 85°C) |
Size | Console: 5.25" x 2.25" x 0.86" (132mm x 57mm x 22mm) LCD Display Size: 3.20" x 1.30" (81mm x 33mm) |
Mounting Options | Visor clip for mounting on visor or door pockets Double-sided tape for mounting on dashboard and other surfaces Velcro with pressure-sensitive adhesive for mounting on dashboard and other surfaces Mounting bracket with right-angle adapter for special mounting needs |
Description | Part Number | |||
Davis DriveRight 600, OBDII Installation | 8126OBD | |||
Davis DriveRight 600, VSS Installation | 8126VSS | |||
Davis DriveRight 600, General Duty | 8126GD | |||
Davis DriveRight 600, Heavy Duty | 8126HD | |||
Fleet Management Software | ||||
Davis Fleet Management Software | 8186 | |||
GPS Module | ||||
GPS Wireless Interface Module for DR600 (1 per Vehicle) | 8127 | |||
GPS Module (1 per vehicle) | 8128 | |||
SmartCard System | ||||
GPS Wireless Interface Module for DR600 (1 per Vehicle) | 8127 | |||
Wireless On-Board Module | 8129 | |||
Base Station for Wireless Download System | 8130 | |||
Configuration Cable for Wireless On-Board Module | 8131 |
Documentation: (pdf)
DriveRight 600E Specifications
DriveRight 600E OBDII Installation Guide
DriveRight 600E User Guide
DriveRight 600E GPS Module Specifications Guide
DriveRight 600E GPS Wireless Interface Specifications Guide
DriveRight 600E Installation Guide